SINGER WSL2000 ATS (Part 1) User Manual
Page 16
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
THREADING UPPER LOOPER
Open front covers.
Bring the upper looper to its lowest position by turning the handwheel toward you
Draw thread from spool and pass it through the thread stand (back to front), under
thread clip guide (1) and then, in order, through guides 2-4 as illustrated below and
inside the front cover of your Superlock.
With the presser foot raised to release tension, lay thread between
thread tension discs. (2) Be sure thread is all the way into the tension discs.
Snap thread into guide A, B, and C (illustration 3), then thread the hole of the upper
looper (4) using the tweezers provided if necessary.
Bring thread tail under foot and toward back left corner of your Superlock.
14