SINGER WSL2000 ATS (Part 1) User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
8. HANDWHEEL
Always turn handwheel toward you.
9. PRESSER FOOT LIFT
Raise the presser foot lift to lift up the
presser foot.
10. CHANGING PRESSER FOOT
Switch off your Superlock.
Raise presser foot.
Raise needles to their highest position by
turning handwheel toward you.
Push lever A and foot will come off.
Position the new foot with pin right under
the groove of the ankle. Lower presser foot
lift so that holder catches the presser foot.
Foot release lever
11. ADJUSTMENT OF THE PRESSER
FOOT PRESSURE
The presser foot pressure is pre-adjusted
for materials of medium thickness.
Adjustment is necessary only when
you work on very thin or very thick
materials. Accordingly, sew thinner
materials with less pressure (2 - 3)
and thicker materials with more pressure
(4 - 5). Increase the pressure of the presser
foot by turning the dial to the desired number.