Installing the motor fig.f – SINGER 1371A2 User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
itmi^,
©iit^;5&<}#HiiM;^^0.5mm(«^)o(#
6. installing the motor
Fig.f
1) Install motor ® on motor base © by screw © (flat washer ®, spring washer ®, and
nut® are used).
2) Placing spacer ® between the table bottom and the motor base, fix the motor base by
installing bolt © (a flat washer ® and nut ® are used).
Tighten the nuts so that the lower nut is levelled with the end of bolt © or bolt ©
projects by 0.5 mm.
6
.