Instruction for set up, ^iiiss]5ffsi5ftklsse – SINGER 1371A2 User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
INSTRUCTION FOR SET UP
1.
##Hl^!Sa
1. S c r e w s u s e d f o r s e t u p Pig.a
® ® ©
F
zfzinSBBlEW»
Ba Fig.a
2. ^iiiSS]5ffSI5ftKlSse:
fSo
2
.
Attaching the shifter driving pin (asm.)
1) Fully apply the supplied grease to the pin of the shifter drive pin (asm.)® and the
rubber surface on the rear see Figure
Fig.b
2) Using screw ® , fix the shifter driving pin (asm.) on machine head base ©.
3) Using screw ®, fix driving pin base ® on the rear surface of the machine head base
so that the shifter driving pin moved up and down smoothly.
4) Install snap ring ® on the shifter driving pin (asm.).