Setting up the thread stand figs – SINGER 1371A2 User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
3) By moving the motor from side to side, adjust the tension of V belts ® and ® so that
they give an approx. 10 mm slack when their middle portions are pushed lightly by
hand.
4) Move the motor pulley back and forth to align V belts ® and
JSU«
7?
A
Motor pulley
2. SETTING UP THE THREAD STAND Figs
r jp, •
s. ;■ «•
-
Assemble the thread stand, and fix it in the table hole. Then tighten lock nut ® to fix the
thread stand. If ceiling wiring can be made, pass the power cable through spool rest rod
(
2
) .