SINGER 1371A2 User Manual
Page 28
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
3) Adjust the position of right base line © by screwing in or out screw © so that it is
kept away from the cutting line of the knife. As screw © is screwed in, the right base
line moves to the left.
4) Through your trial sewing, further perform fine adjustment.
5) It is not necessary to adjust the position of left base line © since it remains
unchanged when the stitch width is changed. However, the left base line should be
moved to the left by screwing in screw @ if it is cut by the knife.
20. CHANGING .THE NUMBTER OF STITCHES
2)Bff^^^«iJWA.B.C..............
1371A3m±S$^H^*^,:^WG^.
25