2)mli4t, Supplied with the reducer (asm) fig.d – SINGER 1371A2 User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
3.
Sc
2)Mli4T
3 Installing transmitter (asm.) and shifter base (asm.)
pig.c
1) Place machine head base ® with its rear surface facing toward you.
2) Fix transmitter (asm.) ® by screw ©
3) Fix shifter base © by screw ®
4) Attach shifter tension spring ® to shifter stopper bracket (asm.) © and shifter tension
spring bracket © of the shifter stopper base (asm.).
4.
sd
4. Supplied with the reducer (asm)
Fig.d
1) Fix tension pulley coupling © by hexagon screw © supplied with the reducer (asm.).
2) Install stud © and machine head base seat felt © on machine head ©.
3) Fully lubricate the shifter driving pin and the driving pin base again. Also lubricate
the end of the shifter driving pin and the head of the screw of the shifter pin bracket.