5)';^m&is\¡¡¡-9m, ttjtitiieffiisisisfts – SINGER 1371A2 User Manual
Page 18
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
m i l
'■
9. WINDING THE BOBBIN
Fig.ii
i5iiiaiSK«Titi#, #iHT!titiiiciDgK®a*ijiTi.
5)';^m&is\¡¡¡-9m,
ttjtitiiEffiiSiSisfts.
1) Fit a bobbin onto the bobbin winder shaft.
2) Take the thread from the spool and pass it through the guides in the numerical order
shown in the figure, and wind the end of the thread several turns around the bobbin.
3) Push the bobbin winder trip latch in the arrow direction, and the bobbin will be wound.
4) Loosening the adjusting nut, perform adjustment by screwing in or out the adjusting
screw so that the bobbin is wound about four-fifths full.
5) If the bobbin is wound unevenly, adjust the position of the bobbin winder tension
bracket for proper and even winding.
15