SINGER 611 User Manual

Page 88

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

THE RUFFIER

Pleating. Move the adjusting lever of the ruffler

to the space setting desired for pleats either 6 or

12 stitches apart.

For the deepest pleat, activate the adjusting

finger and turn the adjusting screw inward to its
maximum setting. For smaller pleats turn the

adjusting screw outward.

Set stitch length. A short stitch places the pleats

more closely together? a long stitch separates the

pleats for a greater distance.

Insert the fabric to be pleated between the blue

blades and into the first separator guide. Lower
oresser bar and stitch.

Crisp fabrics cut on the crosswise grain formA the

sharpest pleats. Glazed fabrics handle besi

if the

glazed side is downward and the soft backing is

lext to the rum

Diaae.

Group Pleating. By using the star setting (straight

stitdiing) alternately with the 6 or 12 stitch setting,
pleats are formed in groups. Even spacing betweeli
groups is accomplished by counting the number of
stitches.