SINGER 611 User Manual

Page 20

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

STITCH LENGTH INDICATOR

Numerals on the left side of the indicator repre

sent the number of stitches per inch. Numerals on
the right side represent stitch length in millimeters.

A superfine control cam be made in case of siitdx

lengths less than 1 mm or stitches per inch {20),

The greatest stitch length of 4 mm or 6 stitches

per inch can be locked in place when stitching folds,

pleats or multiple layers of heavy fabric.

To set stitch length: Loosen by turning thumb nut

to the left as shown. Position lever for desired stitch

length. Tighten by turning thumb nut to the right.

By raising the stitch length regulator to the hig

hest point, reverse stitching is accomplished at the
same stitch length as forward. When in locked

position, 4 mm or stitches per inch (6) cannot be
reversed. If reverse stitching is desired with this

stitch length position, turn thumb nut to the left
until the stitch length regulator can be adjusted to
its highest point at reverse stitching.

UNLOCKS

REVERSE

FORWARD

.2'

'Nv

LOCKS