SINGER 611 User Manual

Page 74

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

THE ZIPFER FOOT

^ <5

iS 1S iS

This foot is designed to facilitate the placement of stitching close

to a raised edge. The hinged feature of this foot insures even feeding

over oins, heavy lavers of fabric or cross seams. It is attached to the

machine in place of the regular presser foot, and may be adjusted to

either the right or left side of the needle. Straight stitch or zigzag

settings mav be used.

APPLICATIONS

Zipper Insertions

Tabular Coidmg

Corded Seams

Slip Cover Welting

Preparation. Secure the zipper foot to the presser

bar as you would the regular presser foot. Set Selec

tor and stitch width lever. Adjustment to the right

or left of the needle is made by loosening the

thumb screw at the bach. Check the position of the

foot bv lowering the needle into the side notch,

making sure it clears the foot. Lock it into position

by tightening the thumb screw.