SINGER 611 - Manual (Page 85)

THE RUFFLBH
Fork
Arm
Adjusling
Lever
presser
Bar
Separator
Blade
^uiflixig
Blade
Separator
Guide
Adjusting
Finger
Adjusting
Screw
This attachment offers a simple and effective way
to make gathered and pleated raffles. Ruffles may
be made separately or mace and applied at the
same time. The ruffler is attached to the machine
m place ot tne regular presser foot anci is used
with a straight stitch setting only.
Selector: AK
Stitch width lever: 3
Throat plate: Straight stitch
Ruffler
Adjusting Points. 1. The adjusting lever sets the
ruiiler lor gathers or pleats. The Number 1 space
setting Is for gathers, and places fullness at every
stitch. Numbers 6 and 12 are soace settings for
pleats, spacing them either 6 or 12 stitches apart.
The star is for straight stitching, and is used when
grouping gathers or pleats.
2. The adjusting finger is used only lor pleating
and affects the width of the pleat. It is thrown out
of action by bringing it out of contact with the
adjusting screw.
3. The adjusting screw regulates the fullness of
gathers or pleats. When turned in to its limit with
the adjusting finger in place, the attachment is set
for its deepest pleat. When turned outward to its
limit and the adjusting finger out of action, the
ruffler gives only a hint of fullness.
$3