SINGER 611 User Manual

Page 86

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

THE

WV¥Lm

Activating Parts* The rufiling Made and the

separator blade are of blue steel and hold the
material to be gathered between them. The rnillmg
Made forms the gathers or pleats by carrying the
fabric to the needle according to the spacing and
fullness to which the rufOer is adjusted. The sepa
rator guide is slotted to guide seam edges evenly

and to separate the ruffle strip from the material to

which the ruffle is attached*

Gathering. Set the adjusting lever of the attach

ment on Number 1 setting, and throw the adjusting
hnger out of action. Turn the adjusting screw for
the amount of fullness desired and set the stitch
length to space the fullness. The attachment is
adjusted for maximum fullness by turning the
adjusting screw all the way inj for less fullness

turn it outward.

Preparation* Raise the needle to its highest point.

Locate the attachment on the machine in place

of the regular pressor foot, at the sarnie time fit the

fork arm over the needle clamp screw. Make sure
both the presser bar screw and the needle clamp

screw are tightened securely.