SINGER 611 - Manual (Page 83)

Adjusting
lug
Mum-SIOTTEB BLNBBH
Slot for
folded
bias tape
Guide
pins
Scroll for
unfolded
binding
Selector: All settings
Stitch width lever: 2 thru 5
Throat plate: General purpose
Multi-slotted binder
The multi-slotted binder is used to apply com­
mercial binding as well as self fabric bias to an
unfinished edge.
This colourful trim is attractive when applied to
children's wear, aprons and fabric furnishings. It is
a practical finish for seam edges that ravel and for
making bound seams.
The attadiment will accommodate both straight
and zigzag siitcfeing.
Cut binding diagonally to form a long point.
Commercial binding 1$ inserted from the right into
the appropriate slot in the scroll. Unfolded bias
of an inch wide is inserted into the opening at the
end of the scroll.
Pull binding through scroll until the evenly
folded edges are under the needle. The free length
of the binding is held between the guide pins.
Set Selector and stitch width lever for either
straight or zigzag stitching.
Insert the edge to be bound into the centre of
the scroll. The stitching is positioned dose to the
edge of the binding by moving the scroll portion
of the attachment to the right or left by means of
the adjusting lug.
8