SINGER 611 - Manual (Page 70)

Dainty scalloped edges are used extensively as self trimming on blouses, cresses, lingerie and child­
ren’s wear.
Perfectly formed and evenly spaced scallops are produced automatically at Selector Settings BE and
BS ®
BR results in a I2-stit
BS a 24-stitch scallop.
Stitch regulator and stitdr width lever settings vary the length and depth of the scallop.
After stitching, trim seam allowance to less than Vs" and clip into the points between scallops.
Some fabrics may also need notching, for a smooth, evenly turned edge.
Turn, gently roll out scallops between the hngers and press.
When scalloping a shaped or bias edge it is best to use an interfacing.
When forming scalloped tucks, add an extra to tuck allowance for seaming.
SCAIiOPING