You are now ready to sew, Throat, Thread – SINGER 717 Scholastic User Manual
Page 15: Turn, Until, Bring, Threads under, Right, Bobbin-thread
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Now that you have wound the bobbin and
threaded the needle, you will need to raise the
bobbin thread through the needle hole In the
throat
plate.
RAfSiNG THE BOBBIIsi THREAD
1.
Hold needle
thread
lightly with the left hand
and
turn
the hand wheel s/ow/y toward you
$0
that the needle enters throat plate.
2.
Continue turning hand wheel and holding
the
needle
thread
until
needle
rises.
Tighten your hold on the needle thread and
bring
up bobbin thread In a loop.
3- Open the loop with your fingers.
Steps
4.
Place needle and bobbin
threads under
the
presser foot and draw both threads to baok
and
right
of needle.
To
regulate
needle-thread
and
bobbin-thread
tensions, see page 16.
. .
you are now ready to sew
Step 4
13