Flttaebing ribbon with a twin noodlo, Machine set-up, Materials – SINGER 9910-WORKBOOK Quantum User Manual

Page 57: Procedure

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

flttaebing Ribbon

with a Twin Noodlo

By using a Twin Needle, two parallel rows of stitches can be used to

attach a ribbon while stitching.

#1, Straight Stitch

3.5, Center Needle Position
3.5
Satin Foot or Standard Foot

Twin Needle*

Twin ju

Machine Set-Up:
Stitch:
Stitch Width:
Stitch Length:
Presser Foot:
Needle:

Needle Setting:

Materials:
5” X 5” piece of lightweight woven fabric, with a stabilizer applied

6” piece of %” wide satin ribbon

Procedure:

♦ Insert the second spool pin.
♦ Both spools of thread follow the same threading path until they reach

the eye of the needle. Thread each needle separately.

♦Insert the ribbon through the opening in the presser foot, pull the ribbon

under the foot and then to the back of the foot.

♦Slowly proceed to sew a row of stitching on the right side of the fabric,

maintaining a slow consistent speed to ensure quality stitching.

Note: Do not use the Automatic Needle

Threader with the Twin Needle.

Twin needle is an optional accessory.