Machine set-up, Materials – SINGER 9910-WORKBOOK Quantum User Manual

Page 36

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Free-motion Stippling is a continuous, meandering line of stitching.
Stippling is seen on quilt tops, quilted craft items and on quilted wearable

art. Stippling creates a flat area, allowing the non-quilted areas to stand
out.

#1, Straight Stitch

Center Needle Position

N/A
Lowered
Embroidery/Darning Foot

Machine Set-Up:
Stitch:
Stitch Width:
Stitch Length:
Feet Dogs:
Presser Foot:

Materials:
Embroidery Hoop

8” X 8”

Cotton with a lightweight batting

Procedure:

♦ Place fabric and batting in the embroidery hoop, making sure the fabric

is taut.

♦ Place the hoop under the foot, positioning the needle over the starting

point of the design.

♦ Lower the presser foot.
♦Turn the hand wheel forward to bring up the bobbin thread through the

fabric. Sew a few securing stitches at the starting point.

♦ Begin sewing, guiding the hoop to create a meandering line of stitches.