Machine set-up, Materials, Procedure – SINGER 9910-WORKBOOK Quantum User Manual

Page 53

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Attach pre-packaged piping to make a bold finish on home decorating

projects, crafts or garments.

#1, Straight Stitch

0.0, Left Needle Position

2.5

Zipper Foot, attach left side of zipper foot pin

Machine Set-up:
Stitch:
Stitch Width:
Stitch Length:

Presser Foot:

Materials:

(2) 3” X 6” pieces of linen-type fabric
7” pre-packaged cord

Procedure:

♦ Place fabric right sides together.
♦ Place piping between the fold, matching the piping’s raw edge with the

fabric’s raw edges.

♦On the wrong side of the fabric sew a straight stitch close to the piping.

Note: The Zipper Foot can be attached right or left, allowing for the piping
to be inserted from either side.