Machine set-up, Materials, Procedure – SINGER 9910-WORKBOOK Quantum User Manual

Page 17

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

The built-in One-Step Keyhole Buttonhole measures the button’s length
and then automatically sews a beautiful buttonhole. The Keyhole

Buttonhole is an attractive closure for coats, jackets and sportswear.
It is often used on menswear.

Machine Set-up
Stitch:
Stitch Width:
Stitch Length:

Presser Foot:

#63, Buttonhole
5.0

0.5

Buttonhole Foot

(See manual for complete machine set-up for buttonholes)

Materials:
Heavy weight woven fabric

Interfacing or tear-away stabilizer
Disappearing marking pen or tailor chalk (for marking start of buttonhole)
Button (to establish length of buttonhole)

Procedure:

♦ Fold fabric in half crosswise, with interfacing or stabilizer between layers.
♦ Make a mark with the disappearing marking pen to indicate where the

bottom or first bartack should be sewn.

Open the button plate and insert the button.