Machine set-up, Material, Procedure – SINGER 9910-WORKBOOK Quantum User Manual

Page 37

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

The Patchwork/Fagoting Stitch can be used to join two pieces of fabric
together. This is a delicate finish that allows a small opening between the
two pieces of fabrics. It is often seen on heirloom garments.

stabilizer

Machine Set-up:
Machine Set-up for Step One (Joining Stabilizer to Fabric)
Stitch:

#1, Straight Stitch

Stitch Width:

3.5, Center Needle Position

Stitch Length:

5.0

Presser Foot:

Standard Foot

Machine Set-up for Step Two (Fagoting)
Stitch:

#15, Fagoting Stitch

Stitch Width:

6.0

Stitch Length:

2.6

Presser Foot:

Standard Foot

Material:
(2) 4”

4” Linen-like fabric

Water soluble stabilizer

Procedure:

♦Fold 4” pieces in half and press.
♦ Lay stabilizer under one piece of fabric, extending away from the folded

edge by 1”.

♦ Using machine set-up for Step One, baste stabilizer /4” away from folded

edge.

♦ Repeat step with other edge, leaving approximately V

gap between the

two folded edges.

♦Set machine for Step Two (Fagoting).
♦Center open area with stabilizer under the foot.
♦Stitch down the stabilizer, slightly catching the edges of the folds.
♦ Remove basting stitches and stabilizer.