Machine set-up, Materials, Procedure – SINGER 9910-WORKBOOK Quantum User Manual

Page 40

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

The Blanket Stitch is a bold finish on fabric edges, especially fleece. This

is ideal for finishing off the edges of blankets or jackets.

#20, Blanket Stitch

7.0

2.6

Standard Foot

Machine Set-Up:
Stitch:
Stitch Width:
Stitch Length:
Presser Foot:

Materials:
3” X 5” polar fleece
Heavy decorative thread in needle and bobbin (for example topstitching

thread or heavy weight cotton)
Water soluble stabilizer

Size 16 or 18 needle

Procedure:

♦ Position fabric with raw edge on left.
♦ Place stabilizer under polar fleece.
♦ Extend stabilizer 1” beyond the fleece edge.

♦Stitch so that the forward motion stitches enter the stabilizer just barely

off the raw edge of the fleece, and the needle swing enters the fleece.