Machine set-up, Materials, Procedure – SINGER 9910-WORKBOOK Quantum User Manual

Page 54

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Piping adds a beautiful finish to projects such as pillows, sleeve edges,

collars and more. The design of the Zipper Foot allows for the needle to
stitch close to the edge of the foot. This is important when inserting
zippers, applying piping or when topstitching close to the fabric’s edge.
Only the Straight Stitch can be used when sewing with the Zipper Foot.

Machine Set-up:
Stitch:

#1, Straight Stitch

Stitch Width:

7.0, Right Needle Position

Stitch Length:

2.5

Presser Foot:

Zipper Foot, attach right side of the zipper foot pin

Materials:

5” X 6” silk-type fabric, cut on bias

7” of purchased cording

Procedure:

♦Fold fabric wrong sides together.

♦ Place cording inside of the fold.
♦On the right side of the fabric, sew a straight stitch close to the piping.

Note: The Zipper Foot can be attached right or left, allowing for
the cording to be stitched from either side.