Onkyo TX-8211 - Manual (Page 23)

Specifications
AMPLIFIER SECTION
I’ower Outpui:
USA & Canudian inudcis:
European models:
Asian models:
Dynamic power utilpiil:
USA & Canadian models:
Other area models:
Tolal Ihirmonic Disloilion:
IM Distortion:
Damping Factor:
Input Sensitivities and Impedance:
PHONO: 2.5 mV. 50 kohms
Line (CD. TAPF--1.2): 150 mV. 50 kohms
Output Level and Impetlance:
Rcc out (TAPE-1.2):
Phono Overload:
50 watts per channel, min RMS. at 8
ohms, both channels driven from 20 Hz to
20 kHz. with no more llian 0.08% THD.
2 X 70 watts at 4 ohms.sl kHz (DIN)
2
X 90 watts at 4 ohms. I kHz (EIAJ)
2 X 135 watts at 2 ohms
2 X 105 watts at 4 ohms
2 X 70 watts at 8 ohms
2x110 watts at 2ohms
2
X 90 watts at 4 ohms
2 X 55 watts at 8 ohms
0.08% at rtiied power
0.08% at I watt output
0.08% at rtited power
0.08% at I watt output
60 at 8 ohtns
150 mV. 2.2 kohms
120 mV RMS. at 1.000 Hz. 0.5% THD.
20 to 30.000 Hz. +1 dl)
20 to 20.000 Hz. ±0.8 dU
±10 dB at l(X)Hz
±10 dB at 10.000 Hz
80 il В (IHI ■ A. 5 mV i nput)
lOOdB(llll-'A)
-.50 dB
Frequency Response:
RIAA Deviation:
Tone Control:
BASS:
TREBLE:
Signal-to-Noise Ratio:
PHONO:
CD/TAPE:
Muting:
TUNER .SECTION
l''M:
Tuning Range:
U..S. and Canadian models: 87.50 to lOK.tX) Ml Iz (l(X) kHz steps)
Eurirpcan and woildwide tmrdels:
87.50 to 108.00 MHz (50 kHz steps)
Mono: 11.2 dBf. 1.0 )tV (75 ohms IHF)
Usable Sensitivity:
.50dB Quieting Sensitivity:
Capture Ratio:
Image Rejection Ratio:
U.S. and Canadian models:
Other nuxlels:
IF Rejection Ratio:
Signal-to-Noi.se Ratitr:
0.9pV (75 ohms DIN)
Stereo: 17.2 dBf. 2.0 pV (75 ohms IHF)
23 pV (75 ohm DIN)
17.2 dBf. 2.0 pV (75 ohms)
37.2 dBf. 20.0 pV (75 ohms)
Mono:
Stereo:
1.5 dB
40 dB
85 dB
90 dB
Mono:
Stereo: 76 dB. IHF
70 dB. IHF
Alternate Channel Attenuation (± 400 kHz);
Mono 55dU. IHI
Selectivity:
AM Suppression Ratio:
Total Harmonie Distortion;
F'iequency Response:
Stereo Separation:
Stereo Threshold:
55 dB DIN (±300 kHz 40 kHz Devi.)
.50 dB
Mono: 0.15%
Stereo: 0.25%>
30 to 15.0«) Hz ±1.5 dB
45 dB at 1.000 Hz/
30 dB at 100 to I0.«X) Hz
17.2 dBf. 2.0 pV (75 ohms)
AM:
Tuning Range:
U.S. and Canadian models: 530 to I.7l0kllz(l0 kHz. steps)
European motlels 522 to 1.611 kHz (9 kHz .steps)
Worldwide iiiodel.s: 5.30 to 1.710 kl Iz (10 kl Iz. steps)
Usable Sensitivity:
531 to 1.602 kHz (9 kHz steps)
30 pV
Image Rejection Ratio: 40 dll
IF Rejection Ratio; 40 dB
Signal-io-Noise Ratio: 40 dB
Tot;il Harmonic Distortion: 0.7%
GENERzVL
Power Supply:
U.S. tind Canaditin models ACI2ÜV.60IIZ
European and Australian models:
Worldwide models:
AC2.30V, 5011z
АС 220-230/120 V switchable. 5(
Power Consumption; I80W
Dimensions (VV x H x D); 435 X 150 X 322 mm
Weight:
17-1/8" х 5-7/8" X 12-11/16"
8.3 kg. 18.3 lbs
REMOTE CONTROL RC-330.S
Transmitter: Infrared
Signal range; Approx. 5 meters, 16 ft.
Power supply: Two “AA" batteries (1.5 V x 2)
.Speciricalions and features are subject to change without notice.
23