Onkyo TX-8211 - Manual (Page 19)

Receiving RDS
(Only for European models)
PTY/TP DOWN TUNING UP ► SCAN
Searching for a station which broadcasts ybur’ ^
favorite category (PTY scian)" f r-^
I’ress the P TY/TP button, to select “1*TY”.
If the station you are receiving is not broadcasting RDS, ‘Not
RDS” (this is not an RDS station) will be shown on the display.
Use the ◄ DOWN TUNING UP ► buttons to select the
program type (PTY), for example, “ROCK M”.
See the PTY description on the previous page.
Pre.ss the .SCAN button to start seiirching for the chosen
PTY station.
When a station is received with the desired PTY, the .scanning
stops for approximately 5 seconds, before the unit starts scan­
ning again.
When the desired station is reached, press SCAN button
again to stop scanning.
Receiving RDS traffic Information
I’ress the I’'I'Y/TP button to select "TP”.
If ! ¡ P i is shown on the display, it indicates that the current
station is broadcasting traffic information.
Pre.ss the SCAN button to start searching for a Ti’ station.
When the unit receives a TP station, it stops scanning. If the
unit cannot receive any TP station, “Not find” (cannot find the
station) is shown on the display.
Displaying Radio Text (RT)
t -
If the station you are listening to is not an RDS station, this func­
tion cannot be u.sed.
1. Each time you press the DISPI.AY button, tlie display
changes ¡»s follows.
j-» I'rciiuency
Radio Text <—
Program Service Name
_____ I
If the current station you are listening to is not an RD.S station,
only the fret|uency of the station appears.
When RT is received, it can sometimes Uike up to 15 seconds (more
or less) to show RT on the display.
Sometimes the following mes.sagcs will be shown on the display.
Wail: When the information is received, the characters will scroll
across the display.
No text: This appears for 3 seconds and indicates that even though
an RDS station is being received, there is no RT inlormation
included.
19