Removing bobbin case from shuttle – Sears 1345 User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
REMOVING BOBBIN CASE FROM SHUTTLE
1. Raise needle to its highest position
rotating hand wheel toward you.
2. Remove the extension table from machine
by pulling it to the left.
3. Open shuttle cover.
4. To remove bobbin case from shuttle, pull
open latch of bobbin case.
5. Pull bobbin case straight out of shuttle,
6. Release the latch and bobbin will come
out from bobbin case.
8