Sears 1345 User Manual
Page 45
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Insert a template into the slot of template
holder. Select the proper size of button
hole by turning the template advance
knob.
4.
Pull the guide plate ail the way forward so
that the guide pin is at "S". This will
enable you to start at one end of the
buttonhole. Drop guide plate into place
over the pinion gear.
Pick up bobbin thread through guide plate
by
turning
hand
wheel
and
drawing
thread to back of machine. Place fabric
between presser foot and guide plate.
Line up edge of fabric with marked
indentation on guide. If you wish all
buttonholes to be 3/4 inch from edge of
garment, line up fabric with 3/4 inch
marking each time you start sewing a
buttonhole.