Adjusting stitch density, Corded buttonholes – Sears 1345 User Manual
Page 43
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
ADJUSTING STITCH DENSITY
Depending upon the fabrics on which you are
^wing, or your own preference in button
holes, you may alter buttonhole stitch density
by varying the original stitch length setting
within the green zone.
1, For more density, turn the dial away from
you.
2. For less density, turn the dial toward you.
CORDED BUTTONHOLES
Hook filler cord (crotchet thread or button
hole twist) to the spur (A), pull both ends of
cord forward under foot and tie to the spur
!B). Sew buttonhole in such a way that
zigzag stitches cover the cord.
When stitching is completed, release cord
from toot, pull ends of cord and snip off extra
length.
42