Burronhole making - built-in system, Preparation – Sears 1345 User Manual
Page 41
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
BUrrONHOLE MAKING - BUILT-IN SYSTEM
(BAR TACK BUTTONHOLES)
Pressure regulator
Stitdi selector
PREPARATION
Carefully mark the buttonhole length on youi
garment. Place the fabric with the buttonholt
marked urtder the buttonhole foot. Pull the
guide foot (A) all the way forward so that ihr
index mark IB) is aligned with the graduatior
1C), with thread to rear.
Reproduction of the identical size buttonhole;
is facilitated with the aid of the graduation;
on the left side of the buttonhole guide foot
These
graduations
are
1/8"
apart
Graduations act as reference mark.
40