Mending and overcast stitching (three step zigzag), Mending and overcast stitching (three-step zigzag), Mending and overcast stitching – Sears 1345 User Manual
Page 33: Mending, Overcasting
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
MENDING AND OVERCAST STITCHING
(THREE STEP ZIGZAG)
Pressure regutattv
Stitch selector
Within gredn zone
K-
MENDING
To repair a straight or three-cornered tear,
position the tear under the needle in such a
way that the stitching catches both sides of
the tear. When mending a three-cornered
tear, stitch from each end to the center. It is
well to use a piece of fabric under the tear for
reinforcement.
OVERCASTING
with
mending
stitch
Three-step zig-zag is a strong stitch because,
as its name implies, it takes three short
stitches where normal zig-zag takes one.
For this reason it is highly recommended for
overcasting, l.e. finishing a raw edge, on ail
types of fabric.
32