Blade storage – Sears 113.20765 User Manual
Page 16
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
2 To turn machine on, place finger under switch
lever and puts end of switch out.
To turn machine OFF . . . PUSH lever in.
NEVER LEAVE THE MACHINE UNATTENDED
UNTIL IT HAS COME TO A COMPLETE STOP.
HOLD PULL
To lock switch In OFF position hold switch IN
with one hand ,.. REMOVE key with other hand.
WARNING: FOR YOUR OWN SAFETY, ALWAYS
LOCK THE SWITCH “OFF” WHEN MACHINE IS
NOT IN USE... REMOVE KEY AND KEEP ITIN A
SAFE PLACE ... ALSO ... IN THE EVENT OF A
POWER FAILURE (ALL OF YOUR LIGHTS GO
OUT) TURN SWITCH OFF... REMOVE THE KEY
AND STORE IT REMOTE FROM THE SCROLL
SAW, THIS WILL PREVENT THE MACHINE
FROM STARTING UP AGAIN WHEN THE
POWER COMES BACK ON.
BLADE STORAGE
Extra blades & blade holders are included with the
scroll saw See illustration for location of storage for
blades and holders, and also storage for set screw
wrench
16