Sears 16 - Manual (Page 87)

6. AUTOMATIC CARRIER RETURN
This function eliminates the need to press the Return Key
at the end of every line.
® This function is automatically activated in STORE mode,
but cannot be activated in JUST mode.
1) Hold down the Code Key and press the Key. A “T”
appears above "RETURN” on the LCD.
2 )
3)
Once activated, the Carrier will automatically return when
you type a hyphen or space in the automatic carrier return
zone.
The automatic carrier return zone is the area 5 spaces to
the left of the currently set right margin. A beep is heard
when the Carrier enters the automatic carrier return zone;.
If a hypherr or space is not typed in the; automatic carrier
return zone, the Carrier will advance past the right margin.
To cancel the Automatic carrier return function, hold down
the Code Key and press the "=” Key again. The “T”
above "RETURN” on the LCD disappears.
7. REQUIRED HYPHEN AND REQUIRED SPACE
This function allows you to enter hyphens or spaces in
the automatic carrier return zone that will not trigger the
automatic carrier return.
1) To type a required hyphen or required space, hold down
the Code Key and Hyphen Key or Space Bar.
2) Any hyphen or space typed in this manner'will not be
removed, nor will it trigger a carrier return.
® Hyphens typed before entering the automatic carrier
return zone when storing a file or when editing a file are
automatically entered as required hyphens.
® When a file is recalled, normal hyphens-i.e. usually syllable
hyphens, originally typed in the automatic carrier return
zone without the Code Key-will automatically be removed
if they do not fall in the automatic carrier return zone dur­
ing printout.
® When a file is recalled, normal spaces (spaces typed with­
out pressing the Code Key) will automatically trigger a car­
rier return if they fall in the automatic carrier return zone ^
during printout.