Memory all clear, File deleting – Sears 16 User Manual
Page 101
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
7. FILE DELETING
1)
Use this function to deiete any unnecessary flies or to
make room for new fiies in the memory.
The LCD must be cieared to activate this function, and it
cannot be activated in the STORE mode.
Hoid down the Code Key and press the “0” Key. "NAME
OF FiLE?” appears on the LCD.
2) Type in the file name and press the Return Key.
3)
“DELETE COMPLETED” will appear on the LCD if the file
was in the typewriter memory.
® “NOT FOUND PRESS ” will appear if the file was not
in the memory. Press the Return Key and retype the file
name. Use Correction Key to delete any name on the
LCD, if necessary.
® You can cancel the file deleting function by pressing the
Return Key only if there is no file name on the LCD.
4)
Press the Return Key to terminate this function.
8. MEMORY ALL CLEAR
This function allows you to delete all files in the memory.
<>
® The LCD must be cleared to activate this function, and it
cannot l5e performed in the STORE mode.
1) Hold down the Code Key and press the “A” Key. “CLEAR
ALL FILES Y/N?" appears on the LCD.
2) Press the "Y” Key. “ARE YOU SURE Y/N?" appears on
the LCD, asking for confirmation.
3)
/Ml files are cleared when the “Y” Key is pressed again.
® The function is canceled if the "N” Key is pressed after
the first or second prompt.
42