Basic operations, Self demonstration, How to start typing – Sears 16 User Manual
Page 63: Set up typewriter
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
BASIC OPERATIONS
1. SELF DEMONSTRATION
Hold down the Code Key and press the “D” Key. The
typewriter will automatically perform a printout of features. -
When you activate this function, the correction memory'
is cleared.
To mancel the printout at any time, simply touch the
Space Bar.
2. HOW TO START TYPING
1.
Set Up Typewriter
1) Place the typewriter on a desk or other flat surface. Lift
up the Keyboard Cover and remove it.
2
)
Press: the' mark^en: the Cdrd:-GompartrrrentiC6vep"ori'the
rear of the typewriter, open the cover and take out the
power cord.
3)
Fit the power cord through the slot on the Cord Compart
ment and close the cover. Plug the cord into an outlet of
the proper voltage (110-120V AC 60Hz).