Second keyboard (special character set), A caps lock, A * 0 – Sears 16 User Manual
Page 34
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
8. SECOND KEYBOARD (SPECIAL CHARACTER SET)
KBn
SHIFT
/'------------------- \l
/ LOCK \
+
1
/ \
Sample Printout
KBE
@ + 0
44»
a CAPS LOCK
The symbols located at the upper right side of the three
character keys can be typed with the following procedure.
1) Hold down the Code Key and press the "5” Key. A "T”
appears above “KBIl" on the LCD.
2) Hold down the Shift Key, or press the Shift Lock Key, and
.........type the key with the desired symbol. (If you pressed the
Shift Key, keep it depressed).
3)
Hold down the Code Key and press the “5” Key again
to cancel the Second Keyboard and restore the standard
keyboard. The “T” above “KBIl” on the LCD disappears.
a * 0
CAPS LOCK
430
Sample Printout
GAPS LOCK
12345
caps lock
"10
caps lock
12345
This function allows the typing of capital letters and num
bers without pressing the Shift Key.
1) Hold down the Code Key and press the “Z” Key. A "T”
appears above “CAPS” on the LCD.
While in Caps lock mode, alphabetic characters are
capitalized without pressing the Shift Key. The number/
symbol keys are printed in lower case.
• If you press the Shift Key in this mode, alphabetic charac
ters are printed in lower case, and the number/symbol
keys are printed in upper case.
2) To cancel Caps lock mode, hold down the Code Key and
press the “Z” Key again. A “T” above “CAPS” on the LCD
disappears.