Sears 16 User Manual
Page 40
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
The stop code can also be used in conjunction with the
decimal tab or auto centering, as a Decimal tab stop or
an Auto center stop.
3.
Entering a Decimal Tab/Auto Center Stop Code
1)
Rrst activate the Decimal tab/Automatic centering func
tion.
2)
Then enter the stop code. A highlighted "S” is displayed
on the LCD.
® You can remove the stop code by deleting the character
"0" with the Correction Key.
3)
Press the Return Key. An "X” which represents the stop
code is printed on the paper. (When entering stop codes
whiie editing a file, there is no need to press the Return
Key and an "X” is not printed.) The “X” is only an indicator,
and will not appear during recall (printout).
DEC. TAB STOP
▼______________ ▼_
AUTO CENTER STOP
T___________________ ▼
NP
C
enter text
I
JT
RETURN
RECALL
PRINTOUT
4. Using a Decimal Tab/Auto Center Stop Code During
Recalling 1[printing)
1
)
2
)
3)
When the typewriter has stopped at a Decimal tab stop
or Auto (Renter stop during printing, “DEC. TAB STOP” or
“AUTO CENTER STOP” will appear on the LCD.
Enter desired text. Entered text is displayed on the LCD.
Press the Return Key or Tab Key for decimal tab stop to
print the text. (Refer to “Decimal Tab”, “Automatic Center
ing".)
4)
Hold down the Code Key and press the "6” Key to restart
printout. (Refer to "RIe Recall”.)
35