Corrections on lcd (display) – Sears 16 User Manual
Page 74
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
10. CORRECTIONS ON LCD (DISPLAY)
1.
Moving the Cursor
/¡
back
|\
f smce
1
(Si
1) Press the Backspace Key to move the Cursor one space
to the left.
2 ) Press the Express Key to move the Cursor one space to
the right.
• Hold down either key for continuous movement.
Ex.
to be corrected
besr typewriter
T
142
L?
o
best typewriter
442
best typewriter
▼
442
LP
Ex.
tO|bft;corract«d
bbest typewriter
▼
442
(S)
i^st typewriter
r
443
^st typewriter
443
2.
Replacing
1) Bring the cursor under- the character you want to.- correct,
using the Backspace and/or Express Key.
2) Type the correct character. The character is automatically
replaced.
3)
Press the Relocation Key to return the cursor to its former
position.
3.
Deleting
1)
Position the cursor under the character to be deleted,
using the Backspace and/or Express Key.
® To delete more than one character, position the cursor
under the character at the far left of the series you want
to delete.
2)
Press the Correction Key to delete the character(s). Each
time the Correction Key is pressed, the character above
the cursor is deleted, and the text is pulled one space to
the left.
® Hold the Correction Key down to quickly delete a number
of characters.
3)
Press the Relocation Key to return the cursor to the pre
vious position.