Check motor rotation, Assembly – Sears 113.206930 User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
assembly
3. Loosen setscrew in motor puliey and place pulley on
shaft with hub flush with end of shaft, insert motor
shaft key and tighten setscrew.
CHECK MOTOR ROTATION
The motor must rotate COUNTERCLOCKWISE when
viewed from PULLEY end.
1. Place motor on your workbench or on floor.
2. Stand clear of motor and plug cord into a properly
grounded outlet {See page 5). Notice rotation of pulley.
If it is not turning COUNTERCLOCKWISE, REMOVE
plug from outlet, and change rotation of motor accord
ing to instructions furnished with motor. : ^
WARNING:
FOR YOUR OWN SAFETY, MAKE SURE
PLUG IS NOT CONNECTED TO POWER SOURCE OUT
LET WHEN CHANGING ROTATION.
DIRECTION
OF
10