A caution, Fig. 3 — rigging details – Carrier 50HJ015 User Manual

Page 3

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

EVAPORATOR-
FAN MOTOR

CURB (50P0900I5I)

TRANSITION DUCT

Fig. 2 — Horizontal Supply/Return Curb Details

DIMENSION A

UNIT 50HJ

Ft-in.

015

3-0

914

024

3-4’/2

1029

ÊJ

NOTES;
1. Dimensions in ( ) are in miilimeters
2 Refer to Tabie 1 for unit operating weights.
3. Remove boards at ends of unit and runners prior to rigging.
4 Rig by inserting hooks into unit base raiis as shown. Use corner

post from packaging to protect coii from damage. Use bumper
boards for spreader bars.

5 Weights do not inciude optionai economizer See Table 1 for econo

mizer weight.

Weights given are for aluminum evaporator coii plate fins and

copper condenser coii piate fins Weights of other metai combi

nations are listed in Table 1

A CAUTION

All panels must be in place when rigging.

Fig. 3 — Rigging Details