YSI PC6000 - Manual (Page 36)

Sensor Drift Compensation Section 8
YSI Incorporated PC6000 Software Operations Manual 32
the cursor on the "DO (mg/L)" entry, press "Return", and then select the "Detail this parameter"
option within the window.
8- Move the cursor to the "Compensate" entry and press "Return". Move the cursor to
the "DO, mg/L" entry and press "Return" to activate the compensation of this parameter.
9- Press the "Tab" key once to move the cursor to the right portion of the screen and then enter the
location and designation of the DO compensation file in this bar. In this case, the entry is:
C:\PC6000\SRUN7DO.CMP. Press "Return" and the screen should appear as follows if the
procedure has been followed:
10- Carry out the same procedure for pH:
(a) Activation of the compensation, and
(b) Entry of the location and designation of the pH compensation file.
Parameter: DO (mg/L)
Formula: Temp (C) Cond (mS/cm) DO (%)
Inputs: Temperature (C) from 6030* probe, channel 0
Conductivity (mS/cm) from 6560 probe, channel 1
DO (%) from 6560 probe, channel 2
Compensate: DO (mg/L) c:\pc6000\srundo.cmp