YSI 610DM - Manual (Page 18)

YSI Incorporated Displays and Loggers 16
Capture memory stores readings to a file as quickly as they come from the sonde. From
Run Mode press the “C” key to start Capture. Stop it by pressing “C”, Esc or Power.
When you press “C”, readings will resume being displayed in the Run mode. When you
press Esc, you return to the Main menu. When you press Power, the YSI 610 turns itself
off.
Add memory stores a single set of readings to a file. From Run Mode press the “A” key
to start Add. Once the reading is stored, the display returns to Run mode and “live”
readings continue to be displayed. You may store as many readings as you like by
pressing the “A” key repeatedly. In all other respects the Capture and Add features are
the same.
After pressing “C” or “A”, enter a file name. You may press the down arrow key to view
additional site names on the Site List, or you may enter a new site name (file name) in the
highlighted area.
Remember that if a file is open and has been activated as a Capture or Add file, you can
only capture readings to a Capture file and only add readings to an Add file.
CAP
TMP 20.54
CND 0.687
DO% 97.5
DOc
38.0
pH 8.32
NO3 2.35
SpC 0.750
SAL 1.42
DO 8.56
DEP 10.12
ORP 90.2
TRB
2.3
Press C key to terminate
Capture Mode.
RUN
TMP 20.54
CND 0.687
DO% 97.5
DOc
38.0
pH 8.32
NO3 2.35
SpC 0.750
SAL 1.42
DO 8.56
DEP 10.12
ORP 90.2
TRB
2.3
6.3 MARK FEATURE
RUN
TMP 20.54
CND 0.687
DO% 97.5
DOc
38.0
pH 8.32
NO3 2.35
SpC 0.750
SAL 1.42
DO 8.56
DEP 10.12
ORP 90.2
TRB
2.3
CAP
TMP 20.54
CND 0.687
DO% 97.5
DOc
38.0
pH 8.32
NO3 2.35
SpC 0.750
SAL 1.42
DO 8.56
DEP 10.12
ORP 90.2
TRB
2.3
File: capbuck1
From Run mode press the C
key. Accept the filename
presented (if appropriate), or
choose from the Site List.
Press Enter to confirm .
ADD
TMP 20.54
CND 0.687
DO% 97.5
DOc
38.0
pH 8.32
NO3 2.35
SpC 0.750
SAL 1.42
DO 8.56
DEP 10.12
ORP 90.2
TRB
2.3
Data Added
RUN
TMP 20.54
CND 0.687
DO% 97.5
DOc
38.0
pH 8.32
NO3 2.35
SpC 0.750
SAL 1.42
DO 8.56
DEP 10.12
ORP 90.2
TRB
2.3
After pressing Enter the
Data Added message
appears momentarily.
The 610 then returns
to Run Mode.
From Run mode press the
A key. Accept the filename
presented (if appropriate), or
choose from the Site List. RUN
TMP 20.54
CND 0.687
DO% 97.5
DOc
38.0
pH 8.32
NO3 2.35
SpC 0.750
SAL 1.42
DO 8.56
DEP 10.12
ORP 90.2
TRB
2.3
ADD
TMP 20.54
CND 0.687
DO% 97.5
DOc
38.0
pH 8.32
NO3 2.35
SpC 0.750
SAL 1.42
DO 8.56
DEP 10.12
ORP 90.2
TRB
2.3
File: addsam25
Press Enter to confirm .