Attendant operating instructions – Winco Mfg. 6240 - Inverness 24 Hour Treatment Recliner User Manual

Page 9

FROM TRENDELENBURG TO RECLINE:

(Attendant ONLY)

Attendant should be positioned on the RIGHT or LEFT side of chair

1. To return chair to the recline position, push down near the rear of

trendelenburg lever (A) with their foot, allowing it to move down and
forward.

2. Hold the lever in position and push down on the legrest (B) to return

the occupant into the recline position. Keep hands away from mecha-
nism

NOTE: Pushing down on the seat or legrest (B) is recommended for
maximum leverage.

Release the Trendelenburg lever.

IMPORTANT:
•

Check to be sure the Trendelenburg lever has returned to the
locked position.

ATTENDANT OPERATING INSTRUCTIONS

PLACING CHAIR INTO TRENDELENBURG:

(Attendant ONLY)

Attendant should be positioned on the RIGHT or LEFT side of chair

1. While occupant is in the chair, place the chair into the fully reclined posi-

tion. (SEE "Recline Chair From Attendant Position" pg.8)

2. Once chair is fully reclined, attendant can push down near the rear of

Trendelenburg lever (A) with their foot, allowing it to move down and for-
ward.

3. Hold Trendelenburg lever in position & push down on the chair's back (B).

This will shift the occupant into the Trendelenburg position.

Release the Trendelenburg lever.

IMPORTANT:
•

Chair must be in the fully reclined position BEFORE occupant can be
placed into Trendelenburg.