Winco Mfg. 8510D1 - Treatment Table with Drawers - Manual

Page 1 of 4
006065 Rev O Date 06-06-12 JWC
1. READ AND FOLLOW ALL DIRECTIONS.
2. NEVER stand on table or INJURY MAY OCCUR.
3. NEVER allow user to sleep unattended on table or INJURY MAY OCCUR.
4. NEVER leave an unconscious user unattended on table or INJURY MAY OCCUR.
5. DO NOT use table for transporting user in or with ANY type of vehicle or trailer. Winco tables have not been tested
or approved for use by an occupant in any type of vehicle or trailer.
6. NEVER leave an infant or child unattended on table or INJURY MAY OCCUR.
7. DO NOT put hands, feet or clothing into any openings on table. Attendant MUST confirm that users hands and feet
are safe or INJURY MAY RESULT.
8. Periodically, recheck tightness of all nuts, bolts and screws.
9. USE ONLY WINCO AUTHORIZED REPLACEMENT PARTS.
10. NEVER EXCEED the recommended weight capacity of 400 lbs. (181.4 kg).
11. SAVE THESE INSTRUCTIONS for future reference and training.
8500/8510
Treatment Table
with Cabinets and/or Drawer Modules
CUSTOMER INSTRUCTIONS
Tools needed:
 Phillips-head
screwdriver
 ½” wrench or ½” socket & ratchet wrench
 7/16” wrench (multiple size wrench included)
 Scissors or box cutter
 -If using powered tools always start hardware together by hand first-
SEE “Parts Reference” (pg.3) for visual reference during assembly.
1. After checking your product for any shipping damage, remove all packing material and hardware that was
secured for shipping.
2. Use a ½” wrench or socket, and remove the four (4) bolts that are attaching the table to the skid. (Bolts go
through the plastic Threaded Inserts in the ends of the Table Legs, and the shipping skid.
3. Using at least two (2) people, lift the table off of the skid.
4. Install the included Glide Feet into the Threaded Inserts, located in bottom of Table Legs. (see note)
NOTE: Turning table on side or upside-down will ease this installation; however, drawers should be removed
first. Please protect your Upholstered Top with cardboard, carpeted floor, etc… when performing this
operation. Use of two or more people is HIGHLY recommended.
PLEASE READ AND FAMILIARIZE YOURSELF WITH ALL INSTRUCTIONS BEFORE PROCEEDING WITH ASSEMBLY
PLEASE READ AND FAMILIARIZE YOURSELF WITH ALL INSTRUCTIONS BEFORE USING THIS PRODUCT.
If you have trouble understanding these instructions contact your dealer or Winco customer support, (800) 237-3377
before attempting to use this product; otherwise injury may occur.
8500/8510 Weight Capacity = 400 lbs. (181.4 kg.)
Winco assumes no responsibility for damage or injury caused by improper assembly,
installation, use, or maintenance of these products.