Winco Mfg. O2 - Oxygen Tank Holder - Manual

Page 1 of 5
006321 REV. B Date 09-07-11 JWC
TO REDUCE THE RISK OF INJURY TO PERSONS:
1. READ AND FOLLOW ALL DIRECTIONS.
2. DO NOT use the IV pole for pulling, moving, or holding the chair in place.
3. DO NOT use this attachment in any location or on products other than those listed in these
instructions.
4. DO NOT make any modifications to the bracket or pole.
5. IV Pole and included bracket are designed for hanging IV solutions ONLY.
6. Immediately remove from service; Any chair with mechanical or visible damage.
7. USE ONLY WINCO AUTHORIZED REPLACEMENT PARTS.
8. SAVE THESE INSTRUCTIONS for future reference and training.
5516 Southwest 1
st
Lane
Ocala, FL 34474
1-800-237-3377 / 352-854-2929 / Fax: 352-854-9544
e-mail: [email protected]
Visit us on the web: www.wincomfg.com
Oxygen Tank Holder
Assembly Kits
For Models:
5400, 5570, 5580, 6550-6551, 6570-6571, 6700, 6940, 6950,
6980, 6988, 6990, 6998
CUSTOMER INSTRUCTIONS
PLEASE READ AND FAMILIARIZE YOURSELF WITH ALL INSTRUCTIONS BEFORE USING THIS PRODUCT.
If you have trouble understanding these instructions contact your dealer or Winco customer support, (800) 237-3377
before attempting to use this product; otherwise injury may occur.
Winco assumes no responsibility for damage or injury caused by improper assembly,
installation, use, or maintenance of these products.
PLEASE READ AND FAMILIARIZE YOURSELF WITH ALL INSTRUCTIONS BEFORE PROCEEDING WITH ASSEMBLY