Winco Mfg. 8450D1 - Multi-Task Table with Drawers - Manual

Page 1 of 4
006150 Revision P Date 06-06-12 JWC
1. READ AND FOLLOW ALL DIRECTIONS.
2. NEVER stand on table or INJURY MAY OCCUR.
3. NEVER allow user to sleep unattended on table or INJURY MAY OCCUR.
4. NEVER leave an unconscious user unattended on table or INJURY MAY OCCUR.
5. DO NOT use table for transporting user in or with ANY type of vehicle or trailer. Winco tables have not been tested
or approved for use by an occupant in any type of vehicle or trailer.
6. NEVER leave an infant or child unattended on table or INJURY MAY OCCUR.
7. DO NOT put hands, feet or clothing into any openings when opening/closing drawers on table. Attendant MUST
confirm that users hands and feet are clear of any moving parts before and while opening drawers or INJURY MAY
RESULT.
8. Periodically, recheck tightness of all nuts, bolts and screws.
9. USE ONLY WINCO AUTHORIZED REPLACEMENT PARTS.
10. NEVER EXCEED the recommended weight capacity of 400 lbs. (181.4 kg).
11. SAVE THESE INSTRUCTIONS for future reference and training.
8400
Pediatric Table
8450
Multi-Use Table
with Cabinet or Drawer Modules CUSTOMER INSTRUCTIONS
Tools needed:
 Phillips
Head Screwdriver
 7/16” wrench, adjustable wrench, or 7/16” socket & ratchet wrench
 Cardboard shipping container (stays under table during assembly to protect upholstery)
 Scissors or box cutter
 - If using powered tools always start hardware together by hand first & wear safety goggles
SEE “Parts Reference” (pg.2) for visual reference.
1. After checking your product for any shipping damage, remove all packing material and hardware that was
secured for shipping.
2. Using at least two (2) people, lift the table off of the skid.
3. Install the included Glide Feet into the Threaded Inserts, located in bottom of table legs. (see note)
NOTE: Turning table on side or vinyl side down will ease this installation, however, drawers should be
removed. Please protect your Upholstered Top with cardboard, carpeted floor, etc… when
performing this operation. Using two or more people is highly recommended!
4. With table in the upright position, adjust the (4) Glide Feet to level table.
5. Check all nuts and bolts to ensure they are tight and did not loosen during shipping.
PLEASE READ AND FAMILIARIZE YOURSELF WITH ALL INSTRUCTIONS BEFORE PROCEEDING WITH ASSEMBLY
PLEASE READ AND FAMILIARIZE YOURSELF WITH ALL INSTRUCTIONS BEFORE USING THIS PRODUCT.
If you have trouble understanding these instructions contact your dealer or Winco customer support, (800) 237-3377
before attempting to use this product; otherwise injury may occur.
Winco assumes no responsibility for damage or injury caused by improper assembly,
installation, use, or maintenance of these products.
8400-8450 Weight Capacity = 400 lbs. (181.4 kg.)