Winco Mfg. 6240 - Inverness 24 Hour Treatment Recliner - Manual (Page 12)

Copyright 2014, WINCO MFG., LLC 12
OCCUPANT OPERATING INSTRUCTIONS
RECLINE WHILE IN THE SEATED POSITION:
1. While seated in the chair, pull back on either of the recline levers (A),
located on either side of chair, to activate the legrest into the recline
position.
2. To operate the infinite back positioning, pull back on the recline lever
and adjust the upholstered back angle by pushing back with your
body until desired angle has been reached.
Release recline lever (A) when you have achieved the desired angle
to lock the back into position.
WARNING:
•
DO NOT push or pull legrest to maneuver chair.
• DO NOT stand or sit on the legrest
• DO NOT place hands, legs, or feet under seat, mid-ottoman, or
legrest.
• Stay clear of recline mechanism when operating chair.
1
2
1
2
RETURN TO THE SEATED POSITION:
1. To return the back to the full upright position pull back on either of
the recline levers while sitting upright in the chair.
Release the recline lever once the back has fully returned to the
upright position.
2. Press down on the legrest with legs/feet until it locks
NOTE: The recline lever does NOT have to be used to return legrest
to its stored position.
A
A
A