Winco DSE3000 Series - Manual (Page 5)

DSE Model 3000 Series Control & Instrumentation System Operators Manual
Part No. 057-086 3000 Series OPERATING MANUAL ISSUE 4 03/12/2009 ADM 5
1 BIBLIOGRAPHY
This document refers to and is referred to by the following DSE publications which can be obtained from the DSE
website www.deepseaplc.com
DSE PART DESCRIPTION
053-050 3110 installation instructions
057-004 Electronic Engines and DSE wiring manual
057-087 3000 Series Configuration Suite manual
2 INTRODUCTION
This document details the installation and operation requirements of the DSE3000 Series modules, part of the
DSEUltra® range of products.
The manual forms part of the product and should be kept for the entire life of the product. If the product is passed or
supplied to another party, ensure that this document is passed to them for reference purposes.
This is not a controlled document. You will not be automatically informed of updates. Any future updates of this
document will be included on the DSE website at www.deepseaplc.com
The DSE 3000 series module has been designed to allow the operator to start and stop the engine/generator, and
if required, transfer the load.
The user also has the facility to view the system operating parameters via the LCD display.
The DSE 3000 module monitors the engine, indicating the operational status and fault conditions, automatically
shutting down the engine and giving a true first up fault condition of an engine failure. The LCD display indicates the
fault.
The powerful microprocessor contained within the module allows for incorporation of a range of enhanced features:
•
Text based LCD display
•
True RMS Voltage monitoring.
•
Engine parameter monitoring.
•
Fully configurable inputs for use as alarms or a range of different functions.
•
Engine ECU interface to electronic engines (specify on ordering)
•
Magnetic pickup interface for engine only applications (specify on ordering)
Using a PC and the 3000 series configuration software allows alteration of selected operational sequences, timers
and alarm trips.
Additionally, the module’s integral fascia configuration editor allows adjustment of this information.
A robust plastic case designed for front panel mounting houses the module. Connections are via locking plug and
sockets.