Winco DSE3000 Series User Manual
Page 31
DSE Model 3000 Series Control & Instrumentation System Operators Manual
Part No. 057-086 3000 Series OPERATING MANUAL ISSUE 4 03/12/2009 ADM
31
CONFIGURATION PARAMETERS – ENGINE (Page 7)
701
Magnetic pickup fitted
On (1), Off (0)
702
Flywheel teeth
000
703
Start Attempts
0
704
RESERVED
Over speed Overshoot %
00
705
RESERVED
Over speed Delay
0 s
706
Gas choke timer (Gas engine only)
0:00
707
Gas on delay (Gas engine only)
0:00
708
Gas ignition off delay (Gas engine only)
0:00
709
Crank disconnect on Oil enable
On (1), Off (0)
710
Check oil pressure prior to starting
On (1), Off (0)
711
Crank disconnect on Oil threshold
0.00 Bar
712
Crank disconnect on frequency
0.0Hz
713
Crank disconnect on Engine Speed
000 rpm
714
Under speed enable
On (1), Off (0)
715
Under speed trip
0000 rpm
716
Over speed trip
0000 rpm
717
RESERVED
Low battery volts enable
On (1), Off (0)
718
RESERVED
Low battery volts trip
00.0 V
719
RESERVED
Low battery volts return
00.0 V
720
RESERVED
Low battery volts delay
0:00:00
721
RESERVED
High battery volts enable
On (1), Off (0)
722
RESERVED
High battery volts return
00.0 V
723
RESERVED
High battery volts trip
00.0 V
724
RESERVED
High battery volts trip
00.0 V
725
Charge alt failure enable
On (1), Off (0)
726
Charge alt failure trip
00.0 V
CONFIGURATION PARAMETERS – ALTERNATIVE CONFIGURATION (Page 8)
801
Alt config – Enable configuration
On (1), Off (0)
802
Alt config - Alternative Engine Speed
On (1), Off (0)
803
Alt config – Ender Voltage Shutdown Enable
On (1), Off (0)
804
Alt config - Under Voltage trip
On (1), Off (0)
805
Alt config - Under Voltage trip level
0 V
806
Alt config - Loading Voltage
0 V
807
Alt config - Over Voltage trip level
0 V
808
Alt config - Under frequency enabled
On (1), Off (0)
809
Alt config - Under frequency trip level
0.0 Hz
810
Alt config - Loading Frequency
0.0 Hz
811
Alt config - Nominal Frequency
0.0 Hz
812
Alt config - Over Frequency enabled
On (1), Off (0)
813
Alt config - Over Frequency trip level
0.0 Hz
814
Alt config - Alternative Under speed enable
On (1), Off (0)
815
Alt config - Alternative Under speed trip
0000 rpm
816
Alt config - Alternative Over speed trip
0000 rpm