15 appendix, 1 can interface – Winco DSE3000 Series User Manual

Page 39

DSE Model 3000 Series Control & Instrumentation System Operators Manual

Part No. 057-086 3000 Series OPERATING MANUAL ISSUE 4 03/12/2009 ADM

15 APPENDIX

15.1 CAN INTERFACE

3110-000-02 Modules are fitted with the CAN interface and are capable of receiving
engine data from engine CAN controllers compliant with the CAN standard.
CAN enabled engine controllers monitor the engines operating parameters such as
engine speed, oil pressure, engine temperature (among others) in order to closely
monitor and control the engine. The industry standard communications interface (CAN)

transports data gathered by the engine controller interface (CAN). This allows generator controllers such as the
DSE 3110 to access these engine parameters with no physical connection to the sensor device.

NOTE:- For further details for connections to CAN enabled engines and the functions available with

each engine type, refer to the manual Electronic Engines and DSE Wiring. Part No. 057-004