Winco DSE3000 Series - Manual (Page 37)

DSE Model 3000 Series Control & Instrumentation System Operators Manual
Part No. 057-086 3000 Series OPERATING MANUAL ISSUE 4 03/12/2009 ADM 37
12 MAINTENANCE, SPARES, REPAIR AND SERVICING
The DSE3000 Series controller is designed to be Fit and Forget. As such, there are no user serviceable parts within
the controller.
In the case of malfunction, you should contact your original equipment supplier (OEM).
12.1 PURCHASING ADDITIONAL CONNECTOR PLUGS FROM DSE
If you require additional plugs from DSE, please contact our Sales department using the part numbers below.
7000 series terminal designation Plug description Part No.
1-7 7 way 5.08mm 007-447
8-9 2 way 7.62mm 007-448
10-17 8 way 5.08mm 007-164
Alternatively, you can purchase a pack containing all three connectors under one part number:
7000 series terminal designation Plug description Part No.
1-7 7 way 5.08mm
007-515 8-9 2 way 7.62mm
10-17 8 way 5.08mm
12.2 PURCHASING ADDITIONAL FIXING CLIPS FROM DSE
Item Description Part No.
3000 series fixing clips (packet of 4) 020-294
12.3 PURCHASING SEALING GASKET FROM DSE
The optional sealing gasket is not supplied with the controller but can be purchased separately.
Item Description Part No.
3000 series silicon sealing gasket 020-385